TheScrappindivazdesignz Tag Showcase

Autumn Fun

2010-09-21T19:23:00.000-07:00

This Tutorial was written in psp 9 but is compatible in any version.

Animation Shop is required for the animation.

Supplies used in this Tutorial

Tube is the art of Suzanne Woolcott which you must obtain a license to use.

You can find her art here.

All other supplies are from the kit Fun at the Pumpkin Patch which was designed by me.

This is available here.

Let's get started

Open up a white canvas 700x700

Open up your tree and place this on the right hand side of your canvas.
Duplicate and place the other on the opposite site.

Next open up your house and place this inbetween the trees.

Now open up your leaves and duplicate them to make a total of 4 place two of them as your bottom layers and place them at the trees.

Open up your fence and place this in front of your house and trees.

Place your other two leaves in the front of the fence.

Open up your pumpkin and place this where desired and duplicate the pumpkin if desired.

Next open up your suflowers and place them where desired.

Open up your tractor and cart and place these where you like as well.

Next open up your bear that is jumping. Place him sitting in the leaves where his legs are hiding.

Duplicate this layer around 4 times and place one on top of each other moving each one higher then the last.

On the last bear rotate him to the right just a bit and then duplicate him the same amount of times moving each one down towards the leaves.
After you have done this x out all your bear layers except the one sitting in the leaves.

Then add your bear that looks as if he has fallen into the leaves, Place him just below the leaf layer that your bears are jumping from. X him out for now as well.

You might want to label your bears bear 1 2 and so on as it is easier to keep track this way.

Now after you have done this add your tube where desired.

Add a mask to the back of your tag if you desire.
Dont forget to add your copyright to your tag.

Merge visible layers and copy and paste into animation shop.

Go back to psp and x out the first bear and unhide the second.
Copy and paste this after current animation.
Continue to do this until you have your tag completely done with the bears.
Save your tag as a gif and you are done.

I hope you enjoyed this Tutorial

Kristi

Love and Hope

2010-08-09T17:59:00.000-07:00

This tutorial was written in psp 9 but is compatible in any version.

Supplies used in this Tutorial

Tube is the art of Zindy Nielsen which you must obtain a license to use.

Get this here.

Template #6 by Babes Designz here
All other supplies are from the kit Color of Love created by me.
This is available for purchase here.

Let's get started

Open up your template and remove your copyright layer.

Open up your scallop frame and place this where the scallop is on the template.

Remove the scallop layer. Add a shadow to the frame.

Open up your Rose frame and place this over the edge of the scallop frame.

Add a shadow.

Next click on the frame background layer and go to selections select all float-defloat

add a new raster layer and flood fill this with a color or paper of choice.
Remove the Background frame layer.

Next open up your window and place this in the middle of your circle and place as your top layer.

Add a shadow of choice.

Click inside of the window opening with your magic wand tool.
Go to selections select all float modify expand by 4 and add a new raster layer. Place this layer just below the window layer.
Add your tube or image inside and select none.

Click on each of your rectangle layers and go to selections select all float-defloat add a new raster layer and flood fill each with a color or papers of choice.
Add a shadow.

Once you have done this decorate your tag with your elements of choice.

Add your Alpha or text of choice and add your copyright.
Add a mask if desired.

Save your tag as a png and you are done.

I hope that you enjoyed this Tutorial

Kristi

All Aboard

2010-07-13T11:33:00.000-07:00

This Tutorial was written in psp 9 but is compatible in any version.

Supplies used in this Tutorial.

Tubes are the art of Suzanne Woolcott which you must obtain a license to use.
You can get this here.

Template is #12 by Sara of Sara's Sinful creations here

Font used is Massey

All other supplies used are from the kit, A is for All Aboard designed by me.

You can purchase this here.

During this Tutorial add drop shadows of choice to your elements.

Let's get started

Remove your Copyright layer from the template.

Remove the 3 rectangle layers and the bottom frame layers.

Click on the large circle layer in your layer palette. Go to selections select all float-defloat.

Add a new raster layer and flood fill this with a paper or color of your choice.

Remove your circle layer.

Next click inside of the background circle layer and go to selections select all float-defloat and add a new raster layer and flood fill this with a paper or color of choice.
Open up your rainbow and place this in the large circle, slightly hiding it behind the frame.

Next click on the frame layer and go to selections select all float-defloat and add a new raster layer and flood fill this with a color or paper of choice.
Remove the frame layer.

Click inside of the frame and remove your frame background. Using your magic wand tool click inside of the frame and go to selections modify expand by 4 and add a new raster layer. Flood fill this with a color or paper of choice.
Keeping your marching ants around the inside of the frame add your tube as a new layer. Open up your clouds and place them in the frame if desired.

After you have done this go to your layer palette and go to rectangle 1 and remove. Click on rectangle 2 and flip this so the wavy side is up. Go to selections select all float-defloat and add a new raster layer. Flood fill this with a green color or paper of choice for your grass.

Open up your Railroad and place this above the grass layer.
Open up your train pieces and rotate them to make them follow the waves of the train. Once your cars are all on your track place any tubes or elements you desire inside of the cars.

Place your tree where desired and any other elements at this time.
Add your text and name to your tag and you are done, I hope you enjoyed this Tutorial.
Kristi

To Sir With Love by Lynn

2010-06-26T20:03:00.000-07:00

This tutorial was written by Lynn on June 26th, 2010
Please do not copy this tutorial into other sites, email lists, etc.

Supplies needed:
PSP 9 (any version will work)
Tube(s) and or graphic of your choice
I used artwork by Keith Garvey. To use this artwork please visit HERE
Template is by Missy of Divine Intentionz #281 which you can get at her blog HERE
Kit or supplies of choice, I used To Sir With Love by me
Font of choice

The scrap kit I used was called Endearing by me, which you can get HERE

Ok let's get started...

This is a really easy tut. Open a canvas 700 x 700. Open template #281 by Missy. Click on the glittered oval layer. Selections, select all, float, defloat. Add a new layer. Fill with color of choice. This color is going to be blurred and in the very background. Once happy fill with the color you chose. Selections none. Apply gaussian blur 25. Now arrange it how you want it to peek out from the oval. When happy lower opacity of this layer to about 35% or your own preference.

Open heart sparkles. Copy and paste as a new layer directly above the blurred background you made. Arrange as happy.

Click on glittered oval layer. You can either fill with a color of choice or use what is there.

Click on oval layer. Select all float, defloat. New layer. Fill with color of choice. Hide original oval layer.

Click on circle layer. I left this black for the background but the choice is up to you. Open tube of choice. Copy and paste as a new layer. Place inside the circle layer. Remove any excess tube from the bottom of the circle. Apply drop shadow as needed.

Open floral swirl. Copy and paste as a new layer. Arrange it so it is to the side of the tube and circle. (see my tag as example) When happy with placement add a drop shadow of choice.

I closed out the word art layers and the star layers from the templates but it is your choice if you wish to include these on your tag.

Open heart pearl. Copy and paste as a new layer. Resize and rotate slightly as you like. Arrange on the swirl as you like it. (again see my tag as example) Apply drop shadow as happy to each heart layer.

Add your text where you are happy now. Apply any appropriate copyright information. Crop and resize as needed. Save as a png or jpeg and you're done.

Star of the Show

2010-06-21T12:35:00.000-07:00

This Tutorial was written in psp 9 and animation shop but is compatible in any version.

Supplies used in this Tutorial
Art is that of Keith Garvey which you must obtain a license to use.

You can purchase this here.

Template is by Missy of Divine Intentionz #338 which you can get at her blog here.

Font used is Century Gothic

Scrapkit used is Uptown Girl which was designed by me. You can purchase this here.

Animation I had found on the net, If this is yours please let me know so I can give proper credit or remove. Right click to save.

Let's get started
Open up your template and remove your copyright layer.

During this Tutorial add a drop shadow of choice to each of your layers.

Open up your paper of choice for your back rectangle.
Go to selections select all float-defloat and add a new raster layer.
Flood fill with the paper or color of choice.

Do the same step above for your circles.

If desired removed the black squares from the frame layer and replace with your makeup mirror frames. Click inside each of the frames with your magic wand tool. Go to selections modify expand by 4 and add a new raster layer and add your tube close up. To remove any excess tube go to selections invert and hit delete on your keyboard. Place the tubes just below the frame layer.

Next in your large middle circle if desired place the diamond star in the middle of the circle.
Place your tube as your top layer.

Next decorate your tag with the elements of your choice.
Add your text and copyright to your tag.
Once you have your tag the way you like copy and paste this over to animation shop.
Duplicate the tag to make a total of 7 frames. Place your animation on the tag where you desire.
Save your tag as a gif and you are done.

I hope you enjoyed this Tutorial
Kristi

Bad Ass

2010-06-20T06:53:00.000-07:00

This Tutorial was written in psp 9 and animation shop but is compatible in any version.

Supplies used in this Tutorial

Tube is the art of Keith Garvey which you must obtain a license to use his art.

You can purchase this here.

Template is by Missy of Divine Intentionz it is #335 get this here.

Fonts used Century Gothic and Bickham Script pro.

All other supplies are from the kit In The Family by KNC Scraps.

You can purchase this here or here.

Road animation I had found off the net, If this is yours please let me know so I can give proper credit or remove Right Click to save.

Let's get started

Open up your template and remove your copyright information and word art if desired.

Remove the background layer as well.

Open up your city and resize this to fit your template.

Place this as your bottom layer. Add a shadow of choice to the city.

Next Click inside of the 2 rectangle layers with your magic wand tool.

Add a new raster layer and flood fill with a background or color of your choice.

Next on your layer palette click on the Dotted line layer and go to selections select all float defloat. Add a new raster layer and flood fill these with a color of choice.

Click on each half circle and do the same step as above.

Click on your two side circles and follow the same step once again.

Next click inside of your circle layer and add a new raster layer.
Flood fill with black.

Place your tubes and elements where you desire.
Add a shadow of choice to each of your elements.

Add your text and copyright to your tag.

Do not add your tube yet.

Merge visible layers and copy and paste your tag into animation shop.

Once in animation shop make a total of 4 frames for your tag.

Then go to edit select all.

Open up your tube in AS and do the 4 frames. Edit select all.

Open up your animation and go to edit select all copy and paste this into the circle in the middle of your tag.

Place your tube where desired on your tag and save your tag as a gif.

You are done, I hope you enjoyed this Tutorial.

Kristi

Strawberry Kisses

2010-06-18T15:21:00.000-07:00

This Tutorial was written in psp 9 but is compatible in any version.

Supplies used in this Tutorial

Tube is the art of Elias Chatzoudis, you must obtain a license to use his art.

You can purchase this here.

Template is number 4 by Babes Designz you can get this here.

Font used is Coaster.

Scrapkit called Berry Sweet which was designed by me.

This is available for purchase here.

Let's get started

Open up your template and remove your copyright layer and your tree layer.

Open up your scallop frame and place this as a new layer over the large circle layer on the template. Remove the large circle layer on the template.

Add a shadow of choice to your frame.

Click on your middle circle with your magic wand tool and go to selections select all float defloat

add a new raster layer and flood fill this with a color or paper of your choice.

Next open up your tube and place this in the middle of your tag and add a shadow of choice.

Click on the rectangle frame layer and go to selections select all float defloat and add a new raster layer. Flood fill this with a color or paper of your choice.

Remove the bottom frame layer.

Next click on the squares inside of the frames and go to selections select all float-defloat and add a new raster layer and flood fill these with a paper or color of choice.

Remove the square layer.

Place your tube in the two squares where desired.
To remove any excess tube click on the paper layer that you filled these with and go to selections invert and then click on the tube layer and hit delete.

Next place your butterflies in place of the bats. Remove the Bats layer.
Repeat the butterflies on the opposite side of the tag if desired.

Add a drop shadow to each of your elements.

Next in the Rectangle place your text or elements of choice.

Add your other elements where you like.
Add a shadow to each element.

Add your text and copyright to your tag and you are done.

I hope that you enjoyed this Tutorial

Kristi

Berry Sweet

2010-06-18T07:22:00.000-07:00

This Tutorial was written in psp 9 but is compatible in any version.

Supplies used in this Tutorial

Tube is the art of Suzanne Woolcott which you must obtain a license to use her art.

You can get this here.

Template is from Babes Designz #6 You can get this here.

Animated Butterfly is from Peachies Collections found here.

All other supplies are from the kit Berry Sweet Designed by me.
You can purchase this here.

Let's get started

Open up your template and remove your copyright information.

Pick your paper of choice and click on your Frame layer on the template.

Go to selections select all float-defloat new raster layer and fill with your paper or color of choice.

click inside of the circle and do the same step as above.

Click on your rectangles and follow the same steps as above changing your paper or color of choice for each rectangle.

At the bottom of your middle rectangle place the scalloped edge.
Add a shadow of choice.

Place your tube of choice in the middle of the frame and add a shadow of choice to the tube.
Open up your bows and place them on each side of your frame if desired.

Add a shadow of choice.

Next open your elements of choice and scatter them around the bottom area of the frame layering them and placing them where you like them.

Add a shadow of choice to each of the elements.

Place your word art on your tag if you like.

Place your other elements on your tag where you like them.

Add your text and copyright to your tag.

Next merge visible layers and copy and paste your tag into animation shop as a new animation.

Duplicate this to make a total of 4 frames. Then go to edit select all.

Open up your butterfly and go to edit select all. Copy and paste this into your tag as many times and where desired.

Save your tag as a gif and you are done.

I hope that you enjoyed This Tutorial
Kristi

Sweet Love by Tiki

2010-06-17T07:14:00.001-07:00

This adorable Tutorial was done by Tiki using my Sweet Summer kit. You can find her Tutorial here.

I love Sailing by Tiki

2010-06-17T07:11:00.000-07:00

This Tutorial was done by Tiki using my Lil Sailor kit. Thank you Tiki!! Awesome as always.

Her tutorial can be found here.

Sweet Tooth By Tiki

2010-06-17T07:09:00.001-07:00

This gorgeous Tutorial was done by Tiki, She used my Sweet Tooth Kit. You can find her Tutorial here.
Thank you Tiki!!

Sweet Tooth

2010-06-11T09:18:00.001-07:00

This Tutorial was written in psp 9 but is compatible in any version of psp.

Supplies used in this Tutorial

Tube is the art of Elias Chatzoudis which you must obtain a license to use his art.

You can purchase this at MPT found here.

Font used is Century Gothic

Template is #9 by Rebel Chic which you can get here.

All other supplies are from the Kit Sweet Tooth which was Designed by me.

You can purchase this here.

Let's get started

Open up your template and remove your Copyright layer.

Open up your Round Scallop frame and replace the Circle 4 with the frame.

Click on circle 3 layer go to selections select all float-defloat add a new layer and flood fill this with a paper or color of choice.

Repeat the above step for Circle 2

Then your middle circle go to selections select all float-defloat add a new layer and flood fill this with a color of choice as well.

Remove all your circle layers that are hidden by your new layers.

Click on your bottom rectangle layer and go to selections select all float-defloat and add a new layer. Flood fill this with a paper or color of choice.

Do the same for the other rectangles as well, Changing the paper or color for the other ones.
Add a shadow of choice to each new layer.
Remove your rectangle layers.

Place your word art in the middle of your top rectangle.

Place your elements of choice where you want them on your tag.

Adding a drop shadow to each of the elements.

After you have done this place your tube where you desire and add a shadow of choice.

Add your text and copyright and you are done.

I hope that you enjoyed this Tutorial

Kristi

Sexy but Sweet

2010-06-02T16:08:00.000-07:00

This Tutorial was written in psp 9 but is compatible in any version.

Supplies used in this Tutorial

Tube is the art of Ismael Rac which you must obtain a license to use his art.

You can purchase this here.

Template is #3 by Laura at Cinnamon Scraps which you can get here.
Font is Hobo STD
Heart Preset shape also used
All other supplies are from the Kit Sweet Summer that was designed by me. You can purchase this here.
Let's get started
During this Tutorial add shadows of choice to each of your layers.
Open up your template and remove the copyright information.
Click on the back circle layer in your layer palette, go to selections select all float-defloat and add a new raster layer.
Flood fill this with your paper or color of choice.
Add a border around the Paper if desired.

Click on the Diamond Border and go to selections select all float add a new raster layer and flood fill this with a color of choice.
Remove the Flower templates if desired.
Remove your scallop shape
In place of this place your Lace frame that is in the kit or frame of choice.

Remove the staples from the frames and remove the frame layers.
Replace the frames with the gingham frame. Duplicate the frame and mirror.

Next click on your circle shape layer and select all float-defloat and add a new raster layer. Flood fill this layer with a color or paper of your choice.
remove the circle layer.
Click inside each of your frames with your magic wand tool and go to selections modify expand by 2 and add a new raster layer. Flood fill with a color or paper of your choice.
Keep your marching ants around the frame and add your tube to each of the frames. To remove any excess tube go to selections invert and hit delete on your keyboard.
After you have done this start layering your flowers at the bottom of your tag.
Keep layering until you get them the way you like them.
Adding a shadow to each of the flower layers.
Add any other elements to your tag as desired.

Add your text and copyright to your tag.
Save your tag as a png and you are done.
I hope you enjoyed this Tutorial
Kristi

Sweet Summer Babe

2010-06-01T14:24:00.001-07:00

This Tutorial was written in psp 9 but is compatible in any version.

Supplies used in this Tutorial

Tube is the art of Keith Garvey which you must obtain a license to use his art.

You can get this here.

Template is #344 By Missy at Divine Intentionz You can get this here.

All other supplies are from the kit Sweet Summer Designed by me which you can purchase here.

Let's get started

Open up your template and remove your copyright information.

Remove the word art and Rectangle if desired.

Also remove the two small side circles.

Click on square one in your layer palette and go to selections select all float-defloat. Add a new raster layer and flood fill this with a color or paper of choice.

Do this for your other rectangle shape as well with a different color of paper of color choice.

Click on Rectangle right and do the same step as above.

Then do the same for Rectangle left.

On your glitter outlines select those and add a new raster layer and flood fill with a color of choice.

Open up your circle watermelon and replace the two side circles with this.
Add a shadow of choice.

Click inside of your frame and add a new raster layer.
Flood fill this with a color or paper of your choice.

Add your tube and remove any excess tube.

Add your other elements where you desire on your tag.
Add your text or alpha and your copyright to your tag.
Save as a png and you are done.

I hope you enjoyed this Tutorial

Kristi

For The Boys

2010-06-01T12:21:00.000-07:00

This Tutorial was written in psp 9 and Animation Shop but is compatible in any version.

Supplies used in this Tutorial

Tube is the art of Rion Vernon which you must obtain a license to use his art. You can get this CILM

Template is #341 From Missy at Divine Intentions You can get this here.

All other supplies are from the kit Lil Sailor designed by me which is available for purchase here.

Let's get started

Open up your template and remove your copyright information.

Remove the word art and the Dotted lines and the Thin Rectangle.

Open up your life saver and place this as your bottom layer.

Click on the Large circle layer go to selections select all float, defloat

add a new raster layer and flood fill this with a paper or color of choice.

Click on the inside circle layer and go to selections select all float defloat add a new raster layer.

Flood fill this with a color of your choice.
Do the above steps for your frames and rectangles.

Click inside of your frame layers and add a new raster layer and flood fill this with a paper or color of choice.
Add your elements inside of your frames where desired.

Add your word art and text where desired.

Place your tube inside of your circle.
Place your other elements where you desire on your tag.
Be sure to add a shadow of choice to all of your elements.

Animate your tag if desired by taking your ship wheels and rotating them 3 times by 90 degrees.

Save your tag as gif and you are done.

I hope you enjoyed this Tutorial

Kristi

Sleepy Time

2010-05-11T11:31:00.000-07:00

This Tutorial was written in psp 9 and animation shop. It is compatible in any version of Psp.

Supplies used in this Tutorial, The art of Keith Garvey which you must obtain a license to use his art. You can get this here.

Clock Template which was created by me, Can be found here. This is for use for this Tutorial. If you would like to use in other tutorials please email me for permission.

All other supplies are from the kit Goodnight Angel which you can purchase here.

Let's get started

Open up your Clock template and remove the copyright layer.

Click on the layer back of clock and go to selections select all float/defloat

Add a new raster layer and flood fill this with a paper or color of your choice.

Remove the back of clock layer.

Next click on the middle clock layer selections select all float/defloat

add a new raster layer. Flood fill this with a color or paper of choice.

Remove the middle clock layer.

Do the same step above for the feet dingers and also the dinger stems and button.

Next it is time to decorate your clock.

Open up your cloud and resize this to fit your needs.

Duplicate the cloud and continue to duplicate until you have clouds all the way around the inside of the clock where your numbers would be.

Place your moon in the middle of the face of the clock.

Add more clouds around the moon.

After you have done this open up your word art of choice and place this at the bottom of your clock.
Open up your tube and place her to the left hand side of the clock.

Open up your other elements and place them where desired.

Add your text to your tag where you like it.

Embelish around the outside of the clock the way you like it.

If you want to animate the tag open up the cow and resize to fit inside of your clock. Duplicate this a total of 3 times.

Rotate the cow to look as if it is jumping over the moon and place one at the beginning of the moon, the back of the moon and one almost out of the clock.

X out the middle and last cow.
Merge all visible layers and copy and paste into animation shop as a new animation.

Go back and x out the cow that you had visible and unhide the middle cow.

Merge visible layers. Copy and paste your tag into AS after current animation.

Do these steps with the last cow and once you have all of your tags in AS lower your speed to around 30 and save as a gif and you are done.

I hope you enjoyed this Tutorial

Kristi

Dream Angel

2010-05-11T09:08:00.000-07:00

This Tutorial was written in psp 9 but is compatible in any version.

Supplies used in this Tutorial, The art is the work of Rion Vernon which you must obtain a license to use his art. You can get this here.

Template is From Cora's Creations Retro Templates, I used the Like a Virgin Template. You can get this at Pimp my Tags Blog here.

Angel Word art created by me for this Tutorial you can download here.
This is for personal use only and if you would like to use in your own Tutorials please ask first.

All other supplies are from the kit Goodnight Angel which can be purchased here.

Let's get started

During this Tutorial add a drop shadow of choice to your elements.

Open up your template and remove the word art from the template.

Click on the rectangle with your magic wand tool and go to selections select all float/defloat add a new raster layer and flood fill this with a paper or color of choice. Remove the rectangle layer.

Click inside the rectangle with the magic wand tool and go to selections modify expand by 2 and add a new raster layer and place a paper or color of choice inside of the rectangle. Go to selections invert and hit delete on the paper.

Now your paper should just be inside of the frame.

Next open up your scallop frame and resize this to fit your needs. place this over the top of the glitter circle. Remove your glitter circle.

Open up your word art of choice and place them on the left and right side of the top of your tag.

Open up your wings and resize them to fit your needs.

Place this in the middle on the top part of your rectangle.

Then open up your clock and place this just above the wings.

Open up your square scalloped frame and place this on top of your frame layer on the template. Remove the template frame. Duplicate the scalloped frame and mirror this frame.

Click inside of each of the frames with the magic wand tool. Add a new raster layer and flood fill this with a color of choice. Add any elements inside of the frames you desire, also add your bows to each of the frames if you wish.

Place your word art at the bottom of your tag.
Open up the cloud and place this around the bottom of the word art.

Open up your tube and place her in the middle of the word art.

Add your text to your tag and you are done.

I hope that you enjoyed this Tutorial.

Kristi

Goodnight Angel

2010-05-10T13:12:00.000-07:00

This Tutorial was written in psp 9 but is compatible in any version.

Supplies used in this Tutorial Tube is from Suzanne Woolcott which you must obtain a license to use her art. You can get this here.
Font is Massey Wide

All other Supplies are from the kit Goodnight Angel which is available for purchase here.

Animation of choice if desired.
Let's get started

Open up a blank canvas 600x600

set your background fill to a paper or color of choice.

Draw out a large circle in the middle of your canvas.

Change your background to a dark color of choice and draw out another circle a bit smaller then the one you just created and make this your top layer.

Open up your moon and place this at the side of your circle you just created.

Add a drop shadow of choice to the moon.

Open up your tube and place this so she looks as if she is sitting on the moon.

Open up the book and place this in front of your tube.

Add a shadow of choice.

Next open up your cloud and start placing these around the moon where desired.

Open up your cow and place this at the edge of your tag.

Place all your other elements where desired and add a shadow of choice.

Duplicate your clouds and place them around the bottom of the tag.

Place your other tube where desired.

Add some more clouds and add your text.

Continue with animation if desired.

Kristi

Sweet Angel

2010-04-27T15:38:00.000-07:00

This Tutorial was written by Kristi on April 27 2010

This was written in psp 9 but is compatible in any version

Supplies used in this Tutorial

Tube is the art of Suzanne Woolcott which you must obtain a license to use. You can get this at her site here.

Template used is by Sara number is 12 you can get this here.

All other supplies are from the kit Sweet Lil Angel which was created by me.

This is available for purchase here.

Let's get started

Open up your template and remove the credits layer.

Remove the 3 rectangle layers if desired

Open up your supplies and minimize them in your psp.

Open up your scallop frame of your choice and place this over the large circle layer.

Remove the large circle layer.

Add a shadow to your scallop.

Go to your large circle background and go to selections/select all float/defloat

add a new raster layer and flood fill this with color or paper of choice.

Click on your frame outline and go to selections/select all float/defloat.

Add a new raster layer and flood fill this with a color or paper of choice.

Add a shadow.

Click inside of the frame on the frame background and go to select all float defloat.
Add a new raster layer and flood fill this with a paper or color of choice.

Open up your tube and place her on top of the background that you just created.

Remove the frame layer and background layer.

Add a shadow.

Next open up your heart of choice and place this where the bottom frame is.
Remove the bottom frame and frame background.

Add a bow of choice to the heart if desired. Add a shadow of choice.

Open up your cloud of choice or one in the kit and place this just above the tube layer.
Duplicate and mirror to place another clound on the other side.

Place this below your heart layer.

Open up the scallop border and place this on top of the scalloped edge of the template.

Remove the scallop on the template.

Add a shadow.

Add your word art to your tag if you desire.

Add a shadow of choice.

Add any other elements that you desire onto your tag.

Add a shadow of choice to each element.

Add your name and copyright and you are done.

I hope that you enjoyed this Tutorial

Kristi

Bloom where you are planted

2010-04-13T10:15:00.000-07:00

This Tutorial was done in psp 9 but is compatible in any version.
All supplies except the ones supplied are from the kit Fairy Floss which was created by me. Which is available for purchase here.
All other supplies are created by me for this Tutorial. Please do not use these supplies in other Tutorials without permission from me. Pick those up here.

Let's get started

Open up a blank canvas 600x600

Open up your scallop frame and place this in the middle of your canvas.

Using your magic wand tool click inside of the frame and go to selections/modify expand by 4 and add a new raster layer.

Flood fill this layer with a color or paper of choice.

Open up the clouds that are supplied in the supplies or cloud of choice and place these inside of the frame.
Add a shadow of choice.

Open up your Rainbow and place this on the outside of your frame and add a shadow of choice.

Open up your elements of choice and place them around your tag where desired.
Place the fairies and the tree inside of the frame.
Open up your grass and place this in the frame.
To remove any excess grass click inside the frame layer with your magic wand tool and go to selections invert and hit delete on the grass layer.
Add a shadow of choice.

Place your text where desired
And you are done.
I hope that you enjoyed this Tutorial
Kristi

Counting Sheep by Kirsty

2010-03-30T21:28:00.001-07:00

This precious Tutorial was done by Kirsty, She used my Day in the Meadow kit. You can find her Tutorial here.

I'll be waiting by Tiki

2010-03-30T21:24:00.000-07:00

This adorable tutorial was done by Tiki using my Day in the Meadow kit. You can find her Tutorial here.

Reading in the Meadow by Kaci

2010-03-30T21:22:00.000-07:00

This adorable Tutorial was done by Kaci, She used my Day in the Meadow kit. You can find her Tutorial here.

Day In the Meadow by Mary

2010-03-30T21:20:00.001-07:00

This beautiful Tutorial was done by Mary, She used my Day in the Meadow kit. You can find her Tutorial here

A Day in the Meadow

2010-03-28T09:21:00.000-07:00

This tutorial was written in psp 9 and animation shop.

Any version is compatible.

Supplies used in this Tutorial

Tube is the art of Keith Garvey which you must obtain a license to use his art.
You can get this here

All other supplies are from the kit Day in the Meadow designed by me.
Which you can purchase here.

During this tutorial add your drop shadows of choice where desired.

Let's get started
Open up a white canvas 700x700 you can resize later.
Pick a paper or color of choice and make this your foreground color.
Make your background color Null.

Using your eclipse preset shape set the setting to around 14 for thickness
Draw out a large circle and place this just a tad to the right on your canvas.
Click inside of the circle with your magic wand tool and go to selections modify expand by 4 and add a new raster layer. Flood fill this layer with a color or paper of choice.

Next draw out another circle with your foreground set to another color or paper.
Make this circle a bit smaller then the first and move this to the middle of the canvas on top of the two circles that you just created.
Click inside of the circle with your magic wand tool and go to selections modify expand by 4 and add a new raster layer and flood fill this with a paper or color of choice.

Next place your frame on the top of the two circles.
Add a new raster layer and flood fill the inside of the frame with a color of your choice.

Next place your grass inside of your frame.
Place your Lamb that is laying down into the grass.

Open up your flower cluster and place this on the grass where desired.
Add your other flowers behind the grass.
Add any other elements of your choice and place your tube where desired.

Add your text and copyright to your tag.
Once you have your tag the way you like you can either save as a png or continue below with the animation.

Open up your lamb and duplicate it to make a total of 3
Place each one on your tag one at the edge on the left one in the middle and one at the right.

x all of them out and merge visible layers and copy and paste your tag into animation shop as a new animation.

Go back to psp and unhide the first lamb and merge layers and again copy and paste into animation shop after current animation.

Go back and x out the first sheep and unhide the second.
Merge visible layers and copy and paste into animation after current animation.

Continue to do this until you are done with the last sheep.
Once you have done this change your speed to around 20 and save your tag as a gif and you are done.
I hope you enjoyed this Tutorial
Kristi

One Fine Day by Tiki

2010-03-21T09:37:00.001-07:00

This adorable Tutorial was done by Tiki, She used my One Fine Day kit. You can find her Tutorial here.

Dream a little Dream

2010-03-17T16:23:00.000-07:00

This Tutorial was written in psp 9 but is compatible in any version.

Supplies used in this Tutorial

Artwork is that of Suzanne Woolcott. You must obtain a license to use her work. Get this here.

All other supplies are from the kit Enchanted Dreams by Lynn. You can purchase this here.

Animation of choice and font of choice needed.

Font that I used is Eatwell Chubby.

Lets get started

Open up a blank canvas 600x600

Place the frame of choice in the middle of your canvas.

Using your magic wand tool click inside of the frame and go to selections modify expand by 4

add a new raster layer and flood fill this with a color of your choice.

Decorate your frame with your cloud, moon and any other elements that you desire.

Add a shadow of choice to each of the elements.

Open up your tube of choice and place this at the top part of the tag close to the cloud.
Add a shadow of choice. After you have done this open up the moon that is on the string.
Remove the moon by using your selection tool and just cut the part of the string that you want to use. Place this in the hand of your tube.

After you have done this open up the teddy bear and place this at the bottom of the string to make it look like it is floating from the string.

Add a shadow of choice to the bear and the string.

Add your text of choice to your tag and your copyright.

Once you are done if you should want to animate it copy and paste your tag into animation shop as a new animation and paste your animation into the tag and you are done.

Save as a gif

I hope that you enjoyed this Tutorial

Kristi

One fine Day by Beverly

2010-03-17T07:31:00.000-07:00

This Tutorial was done by Bev using my One Fine Day kit. You can find this precious Tutorial here. Thank you Bev!!

New Tutorial by Mary

2010-03-17T07:27:00.000-07:00

This adorable Tutorial was done by Mary, She used my One Fine Day kit. You can find her Tutorial here. Thank you Mary!!

Dreams-n-Digital Designer Call

2010-03-15T18:03:00.000-07:00

So Beary Sweet by Tiki

2010-03-15T09:00:00.001-07:00

This adorable Tutorial was done by Tiki, She used my So Beary Sweet kit. You can find her Tutorial here.

About a Girl by Goldie

2010-03-15T08:56:00.001-07:00

This Tutorial was done by Goldie, She used my kit About a Girl. You can find her Tutorial here.

Thank you Goldie, I love it!

One Fine Day by Kirsty

2010-03-14T17:50:00.001-07:00

This gorgeous Tutorial was done by Kirsty. She used my One Fine Day kit. You can find her Tutorial here.

Day at the Park by Mary

2010-03-14T10:55:00.001-07:00

This tutorial was done by Mary, she used my Day at the Park kit. You can find her adorable Tutorial here.

Angelic Beauty Tutorial

2010-03-12T13:35:00.000-08:00

This Tutorial was written in psp 9 but is compatible in any version.
Supplies used in this Tutorial
Filter used is Mura Copies

Tube is the artwork of Elias Chatzoudis which you must obtain a license to use.

Get this here.

Mask is Circle Mask by Monti which you can get here.

Kit used is One Fine Day which was created by myself. You can purchase this here.

Font is Gabriola

Let's get started
Open up a white cavas 600x600
Open up your pink flower or flower of choice.
Use the Mura copies encircle default setting.
Now you have a circle of your flowers in the middle of your canvas.
Add a shadow of choice to the frame.

Click inside of the frame and go to selections modify expand by 4 add a new raster layer and flood fill this with a paper or color of choice. Place this as your bottom layer.

Next open up your frame of choice and place this in the middle of the flower frame.

Using your magic wand tool click inside of your frame and go to selections modify expand by 4 and add a new raster layer. Flood fill this layer with a color or paper of choice.
Keeping your marching ants inside of the frame, open up your tube of choice and place this in the frame. Go to selections invert and hit delete on the keyboard to remove any excess tube.

Open up your leaves of choice, duplicate the layer and rotate each one left and right and place them as your bottom layers and place where desired.

Add a shadow of choice.

Next open up your ribbon and place this just above your frame layer.
Open up your bow and place this at the bottom of the frame.
Open up a flower of choice, duplicate and place one at each end of your bow.
Open up any other elements that you desire and place these around your tag where you like.

Add your text and copyright and then add your mask and you are done.

I hope you enjoyed this Tutorial

Kristi

One Fine Day

2010-03-12T12:52:00.000-08:00

This Tutorial was written in psp 9 but is compatible in any version.
Animation Shop was also used.

Supplies used in this Tutorial
Tube is the art of Suzanne Woolcott which you must obtain a license to use.

You can get this here.

Font is Chauncey Fatty.

Cloud animation I had found on the net, If this is yours please let me know so I can give proper credit or remove. Get this here.

All other supplies are from the kit One Fine Day designed by myself which you can purchase this kit here.

Let's get started

Open up a Blank canvas 600x600

Open up your window and place this in the middle of the canvas.

Add a shadow of choice to your Window.

Place the twisted ribbon of choice at the bottom of the window.
Add a shadow of choice.

Open up the leaves of choice and rotate them by 90 and place them at the bottom of the window. Duplicate to make them more full. Then Duplicate again and place on the other side of the window.
Place more leaves on each side of the opening of the window.
Add a shadow of choice to each of the elements that you have placed.

Open up your flowers and place them where you desire on your tag and any of the other elements that you want on your tag.
Add your text and copyright to your tag where you like.

After you have done this using your rectangle preset shape draw out a square large enough to cover the window opening. Now cut and paste this as a new animation in animation shop. While in animation shop duplicate this to make 27 layers. Go to edit select all.

Go back to your psp merge visible layers on your tag.
Copy and paste this into animation as a new animation.
Duplicate the tag to make 27 frames.
Go to edit select all.
Next open up a white canvas in animation shop 600x600 again duplicate this to make 27 frames.
Edit select all.
Now place your square that you created for your sky, place this into the white canvas you just created and place in the middle.

Open up your cloud animation and select all and copy and paste this on top of your square. Place this directly in the middle.
Then place your finished tag on the top of these two layers and save your tag as a gif and you are done.
I hope you enjoyed this Tutorial
Kristi

New Tutorial by Kaci

2010-03-11T08:01:00.000-08:00

Kaci did this adorable Tutorial using my Splishin and a Splashin kit. You can find her Tutorial here.

Sweet Spring by Mami

2010-03-11T07:59:00.000-08:00

This is yet another adorable Tutorial by Mami, She used my Sweet Spring kit. You can find her Tutorial here.

Splishin and a Splashin by Mami

2010-03-11T07:56:00.000-08:00

This precious Tutorial was done by Mami, She used my Splishin and a Splashin kit. You can find her Tutorial here.

2 New Tutorials by Tiki

2010-03-11T07:53:00.000-08:00

These two adorable Tutorials were done by Tiki, She used my Countryside Garden and Day at the Park kits. You can find her Tutorials here and here.

Day at the Park by Mami

2010-03-11T07:52:00.001-08:00

This adorable Tutorial was done by Mami, she used my Day at the Park. You can find her Tutorial here.

I Bee Cute by Mary

2010-03-10T08:16:00.000-08:00

This is another adorable Tutorial done by Mary using my Bears Bees and Apple Trees. You can find her tutorial here.

Apple of my Eye by Mary

2010-03-10T08:14:00.001-08:00

This adorable tutorial is done by Mary using my Bears Bees and Apple Trees. You can find her Tutorial here.

Here comes the Sun

2010-03-09T19:52:00.000-08:00

This Tutorial was written in psp 9 but is compatible in any version.

Supplies used in this Tutorial

Tubes are the art of Suzanne Woolcott which you must obtain a license to use her art.

You can get this here.

Font is Eatwell Chubby

All other supplies are from the Kit Day at the Park, designed by me.

You can purchase this here.

Let's get started

Open up your tubes and minimize them in your psp.

Open up a blank canvas 600x600

Open up your tree and place this at the left hand side of your canvas.
Add a shadow of choice and duplicate the tree and place the other on the opposite side.

Then open up your grass and place this as your bottom layer, Add a shadow of choice.

Place your blanket in the grass above the grass layer. Add shadow of choice.

Open up the pond and place this next to the blanket or where desired and add a shadow.

Open up your duck and place this in the pond. Again add a shadow.

Place your other elements where you like them.

After you have done this duplicate your grass layer and place this as your top layer.

Open up your clouds and place one on each tree. Below the clouds layer place your sun.

Place the clouds close together without touching. Making sure that the sun is covered.

Next open up your bench and place this as your top layer.
place your tubes so they are sitting on the bench and add a shadow of choice.

Add your text to where you like it, I have placed mine on the Balloon.

Add your copyright to your tag.
Merge all your layers and copy and paste into animation shop as a new animation.
Go back to your psp and pull your clouds apart slightly.
Merge all layers again and copy and paste into animation shop after current animation.

Continue to do these steps until your sun is showing completly.
Save your tag as a gif and you are done.
I hope that you enjoyed this Tutorial

Kristi

Cottontail Lane by Tiki

2010-03-08T07:59:00.001-08:00

This adorable Tutorial was done by Tiki. You can find her Tutorial here. Thank you Tiki!!

New Tutorial by Mary

2010-03-08T07:53:00.000-08:00

This adorable Tutorial was done by Mary, She used my Splishin and a Splashin kit. You can find this adorable Tutorial here. Thank you Mary!

New Tutorial by Kaci

2010-03-08T07:51:00.000-08:00

This Tutorial was done by Kaci, she used my I can't Drive 55 Girl kit. You can find her awesome Tutorial here. Thank you Kaci!!

Spring by Rose

2010-03-06T09:29:00.000-08:00

This precious Tutorial was done by Rose using my Sweet Spring kit. You can find her Tutorial here. Thank you Rose!

Splishin by Katia

2010-03-06T09:27:00.000-08:00

This adorable Tutorial was done by Katia, she used my Splishin and a Splashin kit. You can find her Tutorial here. Thank you Katia!!

Beautiful Girl by Tiki

2010-03-06T09:24:00.000-08:00

This Tutorial was done by Tiki, She used my Beautiful Girl kit. You can find her Tutorial here.

Thank you Tiki!!

Endearing Tutorial

2010-03-04T12:27:00.000-08:00

This tutorial was written by Lynn on March 4th, 2010
Please do not copy this tutorial into other sites, email lists, etc.

Supplies needed:
PSP 9 (any version will work)
Tube(s) and or graphic of your choice
I used artwork by Suzanne Woolcott. To use this artwork please visit HERE
Kit or supplies of choice, I used Endearing by me
Font of choice

The circle template I used and created can be found HERE

The scrap kit I used was called Endearing by me, which you can get HERE

Ok let's get started...

This is a really easy tut. Open a canvas 650 x 650. Download and open the cut out circle included in the supplies. Copy and paste as a new layer. Move it so it is to the left of the middle of the canvas. See my tag as example. Open paper of choice. You could also just fill with color of choice. Copy and paste as a new layer. Click on the circle template. Selections all, float, defloat. Selections invert. Click on the paper layer above it and hit delete once. Selections none. Delete the bottom circle template layer. Click back on the top layer and hit new layer. Choose a light color from the tube you wish you use. Now draw a circle with your selection tool roughly the same size as the template you've made. Fill this new layer with the color you chose. Selections none. Apply gaussian blur 25. Send layer to the bottom. Now arrange it how you want it to peek out from the circle frame. When happy lower opacity of this layer to about 35% or your own preference. This now acts like the inside of the circle and extended background all in one. Click on top layer.

Open vine doodle in the kit. Copy and paste as a new layer. Rotate it til it is almost lying across the page. Resize slightly. Arrange it so that it is going across the page from the circle template. When happy with placement and size move this layer directly beneath the circle template but on top of the blurred background you made. Remove any excess that can be seen in the circle middle. Apply a soft drop shadow as needed.

Open heart splatter in the kit. Copy and paste as a new layer. Rotate it til it is almost lying across the page. Resize slightly. Arrange it so that it is going across the page from the circle template, on top of the viney doodle you just placed. Ensure it is directly beneath the circle layer. It should be directly on top of the viney doodle layer. Remove any excess that can be seen in the circle middle. Apply a soft drop shadow as needed.

Open vines in the kit. Copy and paste as a new layer. Rotate it til it is almost lying across the page. Resize slightly. Arrange it so that it is going across the page from the circle template, on top of both the heart splatter and viney doodles. Ensure it is directly beneath the circle layer. Remove any excess that can be seen in the circle middle. Add the vine layer again. Repeat the process of rotating it and resizing it as before. Now arrange it so that a little is curling over the circle layer. Remove the rest of the excess. Do not worry about cutting it abruptly as we will be covering those bits. Ensure this layer is above the circle layer. Apply a soft drop shadow as needed to both ivy layers.

Open picot bow in the kit. Copy and paste as a new layer. Now using your freehand selector tool, set at point to point for ease, draw around the long curly part of the ribbon. Selections invert, delete. Selections none. You just want the long loop here. You want to place this just off the circle and down to the right slightly, from what looks like the start of the elements coming from the circle template on the side. See my tag for example. Arrange it to look like it is slightly angled and hanging down. Duplicate this layer. Arrange the duplicate layer to be slightly up and to the opposite side. Resize these 2 layers as needed. Add a soft drop shadow of choice.

Open fragile flower 2 from the kit. Copy and paste as a new layer. Resize as needed. Arrange it so that it starts to cover the top of the ribbon loops you placed. Duplicate flower layer twice, resizing slightly smaller. Finish covering the loop tops. See my tag as example. Add a soft drop shadow of choice to each flower layer.

Open tube of choice. Copy and paste as a new layer. Resize as needed. You want to arrange it so that it is within the circle template on the bottom, but coming up out of it on top. See my tag as example. Remove any excess on the bottom. Make sure the tiny bit of ivy curling over the circle template on the front is over the tube. Add a slight drop shadow of choice to the tube layer.

Open butterfly of choice from the kit. Copy and paste as a new layer each time. Resize and rotate the butterfly. Arrange and decorate as happy. Add a drop shadow of choice to each butterfly layer used.

Open full page heart spill. Copy and paste as a new layer. Resize as needed. You basically only will want it peeking out from the circle template and slightly beyond so play with your size. When happy send to the bottom directly above the blurred layer.

Add your text where you are happy now. Apply any appropriate copyright information. Crop and resize as needed. Save as a png or jpeg and you're done.

At the end of the day by Beverly

2010-03-03T09:06:00.000-08:00

This adorable Tutorial was done by Beverly. She used my Splishin and a Splashin Kit. You can find her Tutorial here. Thank you Bev!!

Love by Rosana

2010-03-03T08:29:00.000-08:00

This Beautiful Tutorial was done by Rosana, She used my So Beary Sweet kit. You can find her Tutorial here. Thank you Rosana!

Splishin and a Splashin by Tiki

2010-03-03T08:27:00.000-08:00

This is another cute Tutorial by Tiki, She used my Splishin and a splashin kit. You can find her Tutorial here.

Sleepy time by Tiki

2010-03-03T08:25:00.000-08:00

This is another adorable Tutorial by Tiki, She used my Bedtime Lullaby kit. You can find this Tutorial here.

Love So Sweet By Tiki

2010-03-03T08:24:00.000-08:00

This Tutorial was done by Tiki using my A Love so Sweet kit. You can find her Tutorial here.

Thank you Tiki!!

My Quiet Place

2010-03-02T16:56:00.000-08:00

This Tutorial was done in psp 9 but is compatible in any version.

Supplies used in this Tutorial.

Tube is the art of Suzanne Woolcott which you must obtain a license to use. Get this here.

Template is 137 by Toxic Desirez which you can get here

All other supplies are from the kit Endearing by Lynn which you can get here.

Let's get started

Open up the template and remove the word art, credits and Rectangle.
Click on the frame layer and go to selections select all float/defloat and add a new raster layer.
Flood fill this with a color or paper of choice. Add a shadow of choice.

Click inside of the frame with your magic wand tool and go to selections modify expand by 2 and add a new raster layer. Flood fill this with a paper or color of your choice.

Place the tube in the middle of the frame and add a shadow of choice.

Next open up the floating hearts and place them below the tube layer and add a shadow.

Open up your butterfly and place one small one in her hand and the other somewhere on the tag where desired.

Next open up the patch of flowers and erase the top flower. Place the two flowers all around the frame and add a shadow of your choice.

Place other elements where desired and add your text and copyright to your tag and you are done.

I hope that you found this Tutorial enjoyable.

Kristi

Bath Time Tutorial

2010-03-02T14:22:00.001-08:00

This Tutorial was written in psp 9 but is compatible in any version.

Supplies used in this Tutorial.

Tube is the art of Keith Garvey which you must obtain a license to use his work.

Get this Here.

Mask is# 191 by Insatiable Dreams here.

Template is #7 by Rebel Chick which you can get here.

Font is Cooper std.

All other supplies are from my kit Splishin and a Splashin which you can purchase here. This is on sale right now as well. ")

Let's get started

Open up your template in your program and remove the copyright layer.

Next open up your scallop shape and place this over the large circle layer.

Add a shadow of choice and remove the circle layer.

Click inside of the scallop and go to selections modify expand by 2 and add a new raster layer. Flood fill the new layer with a color or paper of your choice.
Remove any excess paper by going to selections invert delete on the keyboard.

Next click on the large rectangle shape and go to selections/select all/float/defloat. Add a new raster layer and flood fill this with a paper or color of choice. Add a shadow to the paper.
Remove the rectangle layer.

Next do the same step as above with the little rectangles.
Open up your elements of choice and place them where desired.
Add a shadow of choice to each of the elements.
Open up your tube and place this where desired as well.

Add your text to your tag where you like.
Don't forget to add your copyright to your tag.

Add your mask and you are done.
I hope you enjoyed this very simple but fun tutorial.
Kristi

New Tutorial by Katia-Bears Bee

2010-03-02T14:15:00.000-08:00

This Tutorial was done by Katia she used my Bears Bees and Apple Trees kit. You can find her adorable tutorial here. Thank you Katia!!

Love Is Sweet by Rose

2010-03-01T07:51:00.000-08:00

This adorable Tutorial was done by Rose using my Love so Sweet kit. You can find her Tutorial here. Thank you Rose!!

I love Honey by Julie

2010-02-26T08:41:00.001-08:00

This adorable Tutorial was done by Julie, She used my Bears Bees n Apple Trees Kit. You can find her Tutorial here. Thank you Julie!

My Bee-utiful Kids By Kaci

2010-02-26T08:36:00.000-08:00

This precious Tutorial was done by Kaci, She used my Bears Bees n Apple Trees Kit. You can find her Tutorial here. So cute Kaci thank you!

Bears n The Bees By Beverly

2010-02-26T08:33:00.000-08:00

This sweet Tutorial was done by Beverly she used my Bears Bees n Apple Trees kit. You can find her Tutorial here. Thank you Bev!!

I wanna be a Cowgirl by Tiki

2010-02-26T08:32:00.000-08:00

Yet another Gorgeous Tutorial by Tiki, This one is using my I wanna be a Cowboy kit. You can find her Tutorial here. Thank you Tiki!!

Lil Blue by Tiki

2010-02-26T08:30:00.001-08:00

Here is another Adorable Tutorial by Tiki, She used my Fairies Garden Party kit for this. So sweet. Thank you Tiki. You can find her Tutorial here.

Friendship Tutorial by Tiki

2010-02-26T08:28:00.000-08:00

This Adorable Tutorial was done by Tiki, She used my You and Me kit. You can find her Tutorial here. Thank you Tiki!!

Gorjuss Day Tutorial

2010-02-23T18:57:00.001-08:00

This Tutorial was done in psp 9 and animation shop but is compatible in any version.

Supplies used in this Tutorial

Tubes are the Art of Suzanne Woolcott which you must obtain a license to use her work.

You can get this here.

All other supplies are from the kit Bees Bears N Apple Trees created by me which you can purchase here.
Font is Eatwell Chubby

Let's get started

Open up a white Canvas 600x600

Open up your tubes of choice and minimize them in your psp.

During this Tutorial add your shadows of choice to each of your elements.

Open up your frame of choice and place this in the middle of your canvas.

Click inside of the frame with your magic wand tool and go to selections modify expand by 2.
Add a new raster layer and flood fill this with a paper or color of choice.

To remove any excess paper go to selections invert and hit delete on your keyboard.

Next using your eclipse preset shape we are going to make hills for the grass.

Draw out 3 circles and place them at the bottom of your frame. Making the two side ones higher then the middle hill.

To remove any excess circles click inside of the frame with your magic wand tool and go to selections invert and then go to each circle layer and hit delete.

Fill these circles with a paper of choice. Add a inner shadow of choice as well to give them depth.

Next place your tubes inside of your frame where desired.
Add any elements that you wish inside of the frame at this time as well.

Next decorate the outside of your frame with the elements of your choice.

Place your tree behind the frame and background layer and move this out just a bit so it is not completely covered by the frame.
Place your ladder on the tree and place your bear so he looks like he is climbing up the ladder.

Place your cart at the bottom of the tree and place a tube of choice inside of the cart.

Decorate with any other tubes and elements of choice and add your text and copyright.

After you are done Take the apple from the tube or a apple from the kit if you are using different tubes and place this at one of the bottom leaves just directly above your cart.

Duplicate the apple and place this one just a bit lower, Then add another one and place it onto the girls head.

Place another one by her arm and then one close to the opening of the cart.

X out all of the apples except the first apple that you placed in the tree.

Go to layers merge visible and copy and paste your tag into animation shop as a new animation.

Go back to your tag and x out that apple and unhide the second apple.
Continue with the steps above until your down to the last apple.

After you have posted all your tags into animation shop with the apples then hide the last apple and copy and paste the last tag into animation shop and place this as your final tag.
Lower the speed of the animation to about 22 or to your liking and save as a gif and you are done.

I hope that you enjoyed this Tutorial

Kristi

I love Springtime by Julie

2010-02-23T18:39:00.001-08:00

This Tutorial was done by Julie, She used my Sweet Spring Kit. You can find her Tutorial here.

Thank you Julie!

Sweet Spring Bunnies by Mary

2010-02-23T18:36:00.000-08:00

This Tutorial was done by Mary, She used my Sweet Spring Kit. You can find her Tutorial here.

Thank you Mary!

I wanna be a Cowboy by Mary

2010-02-23T18:34:00.001-08:00

This Tutorial was done by Mary using my I wanna be a Cowboy kit. You can find her Tutorial here. Thank you Mary!

Everything Blooms With Love

2010-02-15T23:04:00.000-08:00

This was written in psp 9 and animation Shop.

Supplies used in this Tutorial

Tube is the art of Elias Chatzoudis which you must have a license to use his art.

Get this here.

Template is #3 from Cinnamon's Scraps which you can get here.

Font is not his angel which can be found here.

All other supplies are from the kit Sweet Spring which was created by me.

This is available for purchase here.

Add a shadow of choice on all elements and Papers during this Tutorial.

Let's get started
Open up your template and remove the copyright information.
Click on the Eclipse shape in your layer palette, Selections select all float/defloat.
Add a new raster layer, Add paper or color of choice.
Remove the circle layer.

Next click on the scallop layer and repeat the steps above.
Then go to selections select all float modify and expand by 5 and add a new raster layer and flood fill this layer with a color of choice to give you a border around your scallop.

Next click on the middle circle layer and repeat the same steps as above.
Then place the scallop in the kit or one of choice around the circle layer.
Color your stitches and bring them to the front of the circle.
Remove one of the frame layers and on the other repeat the steps as above.

Again add a border of your choice around the frame.
Click inside of the frame and go to selections modify expand by 2 add a raster layer and flood fill this with a paper or color of choice. Place this below the frame layer you just created.
Keep your marching ants around the inside of the frame and place your tube inside of the frame.
Add your main tube and elements of choice where desired.
Once you are done with this open up your alpha and place this in the middle of the tag after you have your name posted.
Open up the Scallop edge and use this as your grass or use grass of choice.
Open up your bunny of choice and place this in the grass.
Once you are done place your tulips in the grass.
If you do not want to animate then place your copyright on your tag and save a a png. If you are wanting to animate then please continue below.

Duplicate each Tuplip a total of 3 times each.
On the first set of tulips place them very low into the grass to where you can only see the tips. Erase any extra.
Copy and paste this into animation shop as a new animation.

Go back to psp x out the first set of tulips and place the next set of tulips a bit higher, and remove any extra.
Copy and paste after current animation in animation shop.

For the last set of tulips Repeat the following steps above and then lower the speed to your liking and save as a gif and you are done.
I hope that you enjoyed this Tutorial.
Kristi

Gorjuss Spring

2010-02-15T22:59:00.001-08:00

This Tutorial was written in psp 9 but is compatible in any version.
Supplies used in this Tutorial

Art is from Suzanne Woolcott which you must obtain a license to her art.

You can purchase a license here.

All other supplies are from the kit Sweet Spring created by me which can be purchased here.

Let's get started

Open up a canvas 700x700

Open up your scallop and place this in the middle of your canvas.

Duplicate the scallop layer to make 3 more copies and resize these to around 200.

Place each of the smaller scallops inside of the large one where you desire.

Using your magic want tool click inside of your large scallop and go to selections modify expand by 2 add a new raster layer and flood fill this with a paper or color of choice. Place this layer below your large scallop layer.

Next open up your tubes of choice and place these inside of the little scallops that are inside of your large scallop. Erase any excess tube that is hanging out of the frames.
Open up your elements of choice and place these around your tag where you desire.
Add a shadow of choice to each of the elements.

After you have done this draw out a large circle shape and place this as your bottom layer.
Flood fill this with a color or paper of your choice. Go to selections modify expand by 5 or more depending on how thick you would like your border and flood fill with a color that cordinates with the tag.
Merge all layers and you are done.
Very simple and fun tutorial which I hope you enjoyed.
Kristi

Can't Do 55 By Mary

2010-02-15T11:10:00.000-08:00

This wicked tag was done by Mary using my I cant Drive 55 kit. You can find her tutorial here.

Thank you Mary, I love it.

New Tutorial by Kirsty-Angel Of Love

2010-02-11T16:33:00.000-08:00

This adorable Tutorial was done by Kirsty, She used my A Love So Sweet kit. You can find her tutorial here.

New Tutorial by Mami-A Love So Sweet

2010-02-10T09:42:00.000-08:00

This adorable Tutorial was done by Mami, She used my Love So Sweet kit. You can find her Tutorial here.

New Tutorial by Kirsty- 4 letter word

2010-02-09T16:32:00.001-08:00

This beautiful Tutorial was done by Kirsty using my A Love So Sweet kit. You can find this Tutorial here.

New Tutorial by Rose-Sweetheart

2010-02-09T16:30:00.000-08:00

This adorable Tutorial was done by Rose, She used my So Beary Sweet Kit. You can find her Tutorial here.

New Tut by Mary About a Girl

2010-02-09T16:28:00.000-08:00

This adorable Tutorial was done by Mary using my About a Girl kit. You can find her Tutorial here.

Its All About Me

2010-02-04T18:33:00.000-08:00

This Tutorial was written by Kristi on 2-4-10

If you would like to share this Tutorial please link to our blog.
This was written in psp 10 but is compatible in any version. Animation shop was used as well.
Supplies used in this Tutorial

Tube is the art of Elias Chatzoudis which you can purchase a license and his art here.
Template is by Melissaz Creationz #45 which you can get on her site here.
Masks are by Monti I used her Circle mask and Blinds Mask which you can get on her site here
Light is by me and that can be downloaded here.
All other supplies are from the kit about a Girl designed by me which you can purchase here.
Font is BankGothic which is a free font.

Let's get started

Open up your template and remove the copyright layer and the Music notes layer.
Click on the large circle layer in your layer palette and go to selections/select all float/defloat and modify and expand by 2 add a new raster layer and flood fill this layer with a color or paper. Then remove the circle layer. After you have done this change your foreground color to another color or paper of choice and set the thickness to around 15 and draw a border around your circle.

Next change your background fill to a paper or color of choice and using your eclipse preset shape draw out another circle and place this just above the other circle. Again change your foreground color to another paper or color of choice and draw a border around this circle as well.

Next click on your rectangle layers and go to selections select all float, defloat and add a new raster layer and flood fill this with a color or paper of choice. Remove the rectangle layer.

Do the same steps as above for your rectangle frame layers. Then using your rectangle preset shape draw out two skinny rectangles in the middle of the rectangles that you had just created. Add any text that you might like to these rectangles.

Click on the frames layer and go to selections select all float, defloat, modify expand by 2 and add a new raster layer and flood fill the frames with a color or paper of choice. Remove the frame layer.

Keep the marching ants around the insides of the frames and add your tube of choice to each of the frame layers. Continue with adding a paper or color of choice to the frame outlines.
Remove the frame outlines.

Next place your main tube where desired on your tag and add a shadow of choice to the frame. Then add your elements where you desire on your tag and add a shadow of choice.

Add your Text and copyright to your tag add your masks to your tag.

If you would like to animate the tag place the light in the lens of the camera. Merge all layers and copy and paste it into animation shop as a new animation. Then go back to psp and remove the light from your tag and copy and paste it after current animation and go to edit select all and lower the speed of the animation down to about 70.
Save your tag and you are done.
I hope you enjoyed this Tutorial

Kristi

Sweet-n-innoncent

2010-02-03T07:38:00.000-08:00

This Tutorial was written by Kristi on Feb 5th 2010
If you would like to share this Tutorial please link to our blog.

This was written in psp 9 but is compatible in any version.

Supplies used in this Tutorial

Tube is the artwork of Elias Chatzoudis which you can get here.

Template is from Missy of Divine Intentionz #310 found here

Word art is from Missy as well which can be found here

All other supplies are from the kit About a Girl which can get here.

Let's get started

Open up your template and remove the background layer and copyright.

Open up a paper of choice or pick a color of choice and make this your background color in your color picker.

Click on the glitter circle layer.
Go to selections select all float-defloat and add a new raster layer.

Flood fill this with your background fill.

Remove the glitter circle.

Then add a shadow of choice to the layer you just created.

Next click on your black circle layer and go to selections select all float-defloat.

Add a new raster layer and flood fill this with a color or paper of your choice.

Remove the black circle.

Next place a frame of choice in place of the frame 1 layer.
Add a shadow of choice.
Click inside of the frame with your magic wand tool and go to selections modify expand by 2. Add a new raster layer and flood fill this with a color or paper of choice. Remove the gradient layer.

Next click on the other 2 frame layers and go to selections select all float-defloat.

Add a new raster layer and flood fill each of these with a color or paper of choice.

Remove the frame layers. Add a shadow of choice to each of the frames.

Next click inside of your frames with your magic wand tool and go to selections modify expand by 2 and add a new raster layer and flood fill with a color or paper of choice. Place below the frame layers.

Keep your marching ants around the inside of your tag then place your tube of choice inside of the frames. Add a shadow of choice.

Place your main tube in the middle of the frames and place this above the 2 frame layers. Add a shadow of choice.

Place your elements of choice around your tag where you like.

Add your text and word art.
Save your tag and you are done. I hope that you enjoyed this Tutorial

Kristi

So Beary Sweet by Mary

2010-01-30T21:46:00.000-08:00

This adorable tutorial was done by Mary. She used my So Beary Sweet kit. You can find her Tutorial here.

Thank you so much Mary!!

Sweetheart by Rosana

2010-01-29T11:58:00.000-08:00

This Tutorial was done by Rosana using my A Love So Sweet kit. You can find this Tutorial on her site here. Thank you Rosana its beautiful.

Crazy For You By Julie

2010-01-29T11:53:00.001-08:00

Julie used my A Love So Sweet Kit to create this Tutorial, Thank you Julie I love it. You can find her Tut here.

Be My Valentine

2010-01-29T11:17:00.000-08:00

This Tutorial was written by Kristi on January 29 2010

If you would like to share this Tutorial please link to our blog.

This was written in Psp 9 but is compatible in any version.

Supplies used in this Tutorial

Tube is the art of Ismael Rac which you must obtain a license to use his art.

You can get this here.

Template is by Sylly Creationz and it is the Template called Party Girl.
You can get this off of her site here.

Mask is by Monti and you can get this on her site here.

Font is Bank Gothic

All other supplies are from the kit So Beary Sweet by me which you can purchase here.

Lets get started

Open up your template and remove the copyright layers.

Open up your tube and minimize this in your psp.

Next open up a paper of choice

Click on the layer that says Small Pink Circle and go to selections select all float defloat.

Add a new raster layer and place your paper of choice inside of the circle.

Remove the circle layer.

Keep your marching ants inside of the circle and place your tube inside of the circle.
To remove any excess tube or paper go to selections invert and hit delete on your keyboard.

Add a shadow to the tube and circle.

Go to the White circle layer and select this and add a new raster layer and flood fill with another paper or color of choice. Remove the circle layer.

Add a shadow of choice.

Click on the middle Pink circle layer and select it and add a new raster layer and flood fill this layer with a color or paper of choice.

Remove the circle layer.
Do the same thing for the diamond shape as well as the rectangle layers.

After you are done decorate your tag with the elements and text as desired.

Add a shadow of choice to each of the layers.

Merge visible layers and add a new raster layer.
Flood fill this with a color of choice and add your mask to this layer.

Place your copyright on your tag and you are done.

I hope that you enjoyed this Tutorial.

Kristi

Beary Sweet Friends

2010-01-29T11:05:00.000-08:00

This Tutorial was written by Kristi on January 29 2010. If you would like to share this Tutorial please link to the blog.
This was written in psp 9 but is compatible in any version of psp.

Supplies used in this Tutorial
Tube is the art of Suzanne Woolcott which you must have a license to use her art.

You can get this here.

Font used is Sugar Frog Font Angie which you can get here.

All other supplies are from the kit So Beary Sweet which you can purchase here.

Let's get started

Open up a White Canvas 600x600

Open up your circle frame and place this in the middle of you canvas.

If you would like to change the pattern on the frame as I did go to selections select all float/defloat add a new raster layer and flood fill with a color or paper of choice.

Add a bevel of choice to the frame.

Then click inside of your frame with your magic wand tool go to selections modify expand by 2

add a new raster layer and flood fill this with a color or paper of choice.
Place this below the frame layer.

Place your tube just above the paper layer.

Add a shadow of choice.

Next open up a paper of choice and using your rectangle selection tool draw out a thick rectangle and copy and paste this below your two layers.

Then using your paper of choice draw out some circles using your eclipse preset shape and place them around the side of the frame and place them below the frame layer.

After you have done this place your elements where you desire on your tag.
Layer them up to give them dimension.

Add a shadow of choice to each of the elements that you place on your tag.

Next using your rectangle shape draw out a square frame and place this in between your elements. Add a shadow of choice.

Click in the frame and go to selections/modify expand by 2 and add a new layer and flood fill this with a color or paper of choice.

Again add your tube to this frame as well.

Add your text and copyright to your tag and you are done.
A very simple tutorial which in one I hope you enjoyed.

Kristi

Cupid Tutorial by Mary

2010-01-24T08:22:00.003-08:00

Mary did a Tutorial with my A Love So Sweet Kit which you can find here. Thank you Mary this is Darling.

A Love So Sweet animated and non animated

2010-01-21T12:15:00.000-08:00

This Tutorial was written by Kristi January 21,2010

This was written in psp 9 and one sample in animation shop.

If you would like to share this Tutorial please link to the blog.

Supplies used in this Tutorial

Tube is the art of Keith Garvey which you must obtain a license to use his work.

You can get this here.

Cloud animation can be found here.

Fonts used are Felix Titling and Chopin Script.

All other supplies are from the kit A Love so Sweet which can be purchased here.

Let's get started

Open up a white canvas 600x600

Using your heart preset shape draw out a heart in the middle of your canvas.

Click on the heart and go to selections/select all float/defloat

add a new raster layer and flood fill this with a paper of your choice.

Delete the heart shape that is below.

Duplicate the paper heart and place this on the opposite site of your other heart.

Moving this down slightly lower.

Add a drop shadow of choice to each of the hearts.

Next using your Felix Titling font or font of choice type out the letters LVE

For the O I used the Eclipse preset shape. Stretch the letters to your desire.
Add a shadow and bevel of choice to each of the letters and shape.

Click inside of the circle shape with your magic wand tool.
Go to selections modify expand by 2 and delete the inside of the heart that is showing.

Leave this circle blank for the animated version of the tag.

If you want the non animated then continue with adding a new raster layer.

Flood fill the circle with a color or paper of choice.

Keep your marching ants around the inside of the circle and add a tube of choice inside of the circle.

To remove any excess tube go to selections invert and hit delete on your keyboard.

Decorate your tag the way you desire with the elements of your choice.

Adding a shadow of choice to each of the layers.

Add your text and copyright merge visible layers and save as a png and you are done with the non animated version.

Now onto the animation tag.

After decorating your tag the way you desire and adding your text and copyright.

Click inside of the circle with your magic wand tool and go to selections modify expand by 2 and add a new raster layer.

Flood fill this layer with white or a color of choice.

Now x out the circle layer in your layer palette.

Merge all visible layers on your tag and save as a png but do not close out the tag.

Next x out the tag but unhide the circle and save this as a png as well.
Copy and paste the circle into animation shop as a new animation Duplicate it to make a total of 26 frames.

Open up your cloud animation and go to edit select all and copy and paste your animation into the circle.

Now open up your tag in animation shop

Duplicate the frames to make 26 frames.

Edit select all. Then copy and paste your tag onto your circle with the clouds.

View your animation and if you are happy save the tag as a gif and you are done.

I hope that you enjoyed this Tutorial.

Kristi

One In A Million

2010-01-14T11:21:00.000-08:00

This Tutorial was written in psp 9 but is compatible in any version.

Supplies used in this Tutorial

Tube is the art of Suzanne Woolcott which you can get a license to purchase her art here.

Word Art is from Tamie from her Template 15. You can get this here.
Font used is Belshaw

All other supplies used are from the kit Faeries and Daydreams created by me which you can

purchase here. This is available in tagger sized.

Let's get started

Open a white canvas 600x600

Open up your flower frame and place this in the middle of your canvas.

Add a shadow of choice to the frame.

Use your magic wand tool to click inside of the frame and go to selections modify expand by 2.

Add a new raster layer and flood fill with a paper or color of your choice.

To Remove any excess paper go to selections invert and hit delete on your keyboard.

Next open up your tube of choice and place this in the middle of your frame above your paper fill. Then add a shadow of choice to the tube.

Open up the Rainbow and place this where desired.

Adding a shadow to the rainbow.

Open up your leaves and place these where desired around the bottom of your tag.

Open up the flower of your choice and place them at each end of the leaves.

Open up your fairies of choice and place them where you desire and add a shadow of choice.

Open up your word art and place this where you like it and then add your text .

Merge visible layers and save your tag as a png.

I hope that you enjoyed this Tutorial

Kristi

Santa's Sweetie Tutorial

2009-12-12T17:14:00.000-08:00

This Tutorial was written by Kristi on 12-12-09

If you would like to share this Tutorial please link to our Blog.

Supplies used in this Tutorial

I used the art of Elias Chatzoudis which you must obtain a license to use his work.

You can get that here.
Font used is Belshaw

All other supplies are from the kit The North Pole which was created by me.

You can purchase this here.

This is available in tagger size.

Let's get started

Open up a blank canvas 600x600

Open up your scallop frame of choice.

Place this on the right hand side of your canvas.

Using your magic wand tool click inside of the scallop shape.

Go to selections modify expand by 2 and add a new layer.
Flood fill the new layer with a paper or color of choice.

Remove the marching ants and add a shadow of your choice to the scallop.

Add the tube of your choice on the inside. Remove any excess tube.

Open up your scallop frame again and resize this to about half the size of your other. Place this overlapping just a bit onto your other scallop frame.

Again click inside of the frame with your magic wand tool.
Go to selections modify expand by 2 and flood fill this with a color or paper of choice.

Again add your tube of choice and remove any excess tube.

After you have done this place your elements where you desire on your tag.

Add a shadow to each of the elements and save your tag as a png and you are done.

I hope that you enjoyed this Tutorial.

Gorjuss Winter Tutorial

2009-12-07T20:41:00.000-08:00

This Tutorial was written in psp 9 but is compatible in any version.

Supplies used in this Tutorial

Tube is from Suzanne Woolcott which you can purchase her art here.

All other supplies are from the kit A Bears Winter Wonderland which was created by me.

This is available for purchase here which is also available in tagger sized.

Filter used in this Tutorial is Vanderlee Snowflakes which is a free plugin

Font is Hello Again by Miss Tiina which is a paid font.

Let's get started

Open up a white canvas 600x600

Open up your Scallop frame of choice and place this in the middle of your canvas.

Using your magic wand tool click inside of the frame and go to selections modify expand by 4 add a new raster layer. Flood fill this layer with a color of choice.

Place this as your bottom layer.

Next open up the elements that you would like inside of the frame.

Place these where desired and add a shadow of choice to each of your elements.

Open up the elements that you would like on the outside of your tag and decorate your tag until you are happy with it.

Again add a shadow of choice to each of the layers.

Place your tube where you desire if you have not already.

Add a shadow of choice.

Next add your text and your copyright to your tag.

Click on your background layer with your magic wand tool and add a new raster layer.

On the new layer open up the filter Snowflakes and use the basic snow filter.

Lower the opacity of the snowflakes to your desire.

Merge all layers and copy and paste your tag into animation shop as a new animation.

Go back to your psp and undo merged layer and undo the snowflakes.

Redo the snowflakes but change your speed by 5.

Merge visible layers and copy and paste into animation shop after current animation.

Continue to do the above step until you get the effect you like.

Save your tag as a gif and you are done.

I hope that you enjoyed this Tutorial

Kristi

Santa's Sexy Helper by Julie

2009-12-07T18:02:00.000-08:00

This adorable tutorial was done by Julie, She used my Holly Jolly Joy kit. You can find her Tutorial here.

Happy Holidays By Kaci

2009-12-07T18:00:00.001-08:00

This Tutorial was done by Kaci, she used my Beary Christmas Kit. Thank you Kaci for the adorable Tutorial. You can find her tut here.

Winter Wonderland by Kaci

2009-12-07T17:58:00.001-08:00

This adorable Tutorial was done by Kaci, She used my Holly Jolly Joy kit. You can find her Tutorial here.

Thank you Kaci!!

Kitty Christmas by Katia

2009-12-07T17:53:00.001-08:00

This Tutorial was done by Katia, She used my A Kitty Christmas kit. Thank you Katia, I love it.

You can find her Tutorial here.

Beary Christmas by Mami

2009-12-07T17:51:00.001-08:00

This is a Tutorial done by Mami, She used my Beary Christmas Kit. Thank you Mami, so adorable.

You can find her Tutorial here.

Holly Jolly Joy by Deep

2009-12-07T17:48:00.000-08:00

This Tutorial was done by Deep, She used my Holly Jolly Joy kit. Thank you Deep. I love it.

Her tutorial can be found here.

A Kitty Christmas by Mary

2009-12-07T17:46:00.001-08:00

This Tutorial was done by Mary, She used my Kitty Christmas Kit. Thank you Mary.

I Love it. You can find her Tutorial here.

Waiting For Santa

2009-11-19T16:13:00.000-08:00

This Tutorial was written in psp 9 and animation shop but is compatible in any version.

Supplies used in this Tutorial, Everything is from my kit Beary Christmas which can be purchased here. This kit is available in tagger sized.

Filter used is Vanderlee snowflakes which is a free filter.

Let's get started

Open up your supplies and minimize them in your psp.

Open up a white canvas 600x600

Place your window in the middle of the canvas.

Below the window add your outside decor, House, light, Snow ect.

Next open up the bear that is facing backwards and place him on the ledge of the window.

Add a shadow of choice.

Open up your Other supplies and decorate your tag the way you desire.

Add a shadow to each of your layers.

After you have your tag decorated the way you like it add your text to your tag.

Next using your rectangle preset shape draw out a dark blue square at the back of your window.

Place this as your bottom layer.

Go to selections select all float and defloat on this layer.

Add a new raster layer and on this layer use your snowflakes filter.
I used the basic white snow, and lowered the opacity to around 20.
Merge visible layers and copy and paste this over to animation shop as a new animation.

Go back to your tag and edit undo merged layers edit undo the snowflakes.

Redo the snowflakes but change only the seed by 5.

Follow the steps above and copy and paste into animation shop after current animation.

Do this a total of 4 times to make 4 frames.

Save your tag as a gif and you are done.

I hope that you enjoyed this Tutorial.

Kristi

Beary Christmas-Tutorial

2009-11-19T14:37:00.000-08:00

This Tutorial was written by Kristi on 11-19-09

This was written in psp 9 but is compatible in any version of Psp.

Supplies used in this Tutorial

The art of Suzanne Woolcott, You must obtain a license to use her art. You can get this here.

Mask is by Weescottlass which you can get at her blog here.

The number of the mask that I used is 236.

All other supplies are from the kit Beary Christmas which was designed by me.

You can purchase that here. This kit is also available in tagger sized.

Let's get started

Open up a white canvas 600x600

Open up your supplies and minimize them in your psp.

Open up the scallop frame and place this in the middle of your canvas.

Using your magic wand tool click inside of the frame and go to selections modify expand by 4

Add a new raster layer and flood fill this with a color or paper of your choice.

Next keep your marching ants inside of the frame and open up your tube and place this inside of the frame.

Open up your other supplies and place them where you desire on your tag.

Adding a shadow of choice to each of the layers.

Next add a new raster layer and flood fill this with a color of your choice.

Go to layers new mask layer from image. Find your mask in the drop down box.

Click ok. Go to your layer palette ungroup the layers by right clicking.

Then delete the mask layer and check yes to the box that pops up.

Save your tag and you are done.

I hope you enjoyed this Tutorial.

Kristi

Classic Tidings by Lynn

2009-11-13T20:47:00.000-08:00

This tutorial was written by Lynn on Nov.13th, 2009
Please do not copy this tutorial into other sites, email lists, etc.

Supplies needed:
PSP 9 (any version will work)
Tube(s) and or graphic of your choice
I used artwork by Jennifer Janesko. To use this artwork please visit here
Kit or supplies of choice, I used Classic Tidings by me
Font of choice

The scrapkit I used was called Classic Tidings by me, which you can get here

Ok let's get started...

This is a really easy tut. Open a canvas 650 x 650. Open the wooden frame that came in the kit. Copy and paste as a new layer. Resize as needed. Rotate very slightly to the side. Copy and paste the frame as a new layer again. Resize slightly smaller then the first time. Rotate 90 degrees right so it is upright. Rotate slightly. You want it to overlap the bigger frame slightly. Duplicicate and mirror. Arrange how you wish this frame to be. Activate the biggest (bottom) frame. Copy and paste the tube or graphic of choice as a new layer. Resize as needed. Place it directly behind the frame. Remove any excess. Click back on the frame and add a soft drop shadow of choice. Repeat this process to the other 2 frames.

Open ribbon wrapper of choice. Copy and paste as a new layer. Resize as needed. Arrange it so that it is under the right smaller frame but over the remaining 2 frames. See my tag as example. Arrange how you like and add a soft drop shadow of choice.

Now decorate around your frames using whatever elements you want from the kit. Ensure they are all on seperate layers. When happy add a drop shadow of choice to each layer.

Open Christmas doodle. Copy and paste as a new layer. Resize as needed. Send to the bottom. Arrange how you want it to look peeking out from behind the frames. When happy add a drop shadow of choice.

Click on the top layer. New layer. Take your elipse selection tool and draw a small elipse. Fill with a color of choice. Selections none. Guassian blur 50. Arrange how you want it to look peeking out from the frame. Duplicate and flip. Rearrange as needed. Send both layers to the bottom. Lower opacity until happy with the shade.

Add your text where you are happy now. Apply any appropriate copyright information. Crop and resize as needed. Save as a png or jpeg and you're done.